Easy, Beginner Friendly Crochet Baby Bonnet Pattern- The Rudy Bonnet
The Rudy Bonnet has been designed to go with The Rudy Cardigan. The bonnet is made from a rectangle and then folded in half and sewn at the back to create a square shaped bonnet. The bottom of the bonnet is decreased to fit snuggly around the neck. Next an hdc ribbing is stitched onto the bottom of the bonnet and a sc ribbing is stitched onto the front of the bonnet. Lastly, two simple straps are made using chains and sc stitches. Very easy and perfect for a beginner to making garments.
The Matching Rudy Cardigan
The gender neutral Rudy Cardigan is a joy to make. Worked from the top down, it alternates hdc and dc rows. The interesting texture is made by crossing two dc stitches. There is a very helpful little video tutorial on how to do this included in the pattern. After the body is stitched, a sc ribbing is added to the bottom directly onto the cardigan, no extra sewing. Next, the two sleeves are worked right onto the cardigan. For some extra detail, I added two pockets, but they are of course optional! I really hope you love making this “perfect for every occasion” cardigan. Get your copy now at shopthemoulehole.com
Buy the Ad Free, Colour Coordinated Pattern
It’s always nice to have a go-to baby bonnet pattern and the Rudy Bonnet might just be the one for you. If you would like to purchase the ad free, colour coordinated version that is easy to access from your phone or i-pad, no scrolling involved you can easily grab the pdf pattern now.
The Pattern
U.S. TERMS
Materials
4.00mm (U.S. G-6) crochet hook or size needed to obtain gauge
*DK yarn. Rico Baby Classic DK in the colour Alga (075).165m/180yds/50g per skein. If you purchase from this link, I will earn a small commission and can continue creating my patterns. Your support means the world to me!
See chart below for approximately how much yarn you will need and all sizing information.
*tapestry needle
Gauge
19 sts/12 rows= 10cmX10cm (4X4 inch)in hdc and crossed dc
Make a Gauge Swatch: 10cmX10cm (4X4 inch)
20 stitches are required for the swatch, however, measure 19 stitches to meet the gauge requirement listed above.
ch 22
Row A: hdc in the 3rd ch from the hook and in each st across [20sts]
Row B: ch2, dc in the first st, *sk the next st, dc in the next st, go back and dc in the skipped st, repeat from * to the last st, dc in the last st, turn [20sts] see video below
Row C: ch1, hdc in each st across turn [20sts]
Repeat rows B & C until you reach 12 rows.
Stitches and Abbreviations
ch- chain stitch
BLO- back loop only
dc- double crochet
hdc- half double crochet
hdc2tog- half double crochet two stitches together
sc- single crochet
sk- skip
sl st- slip stitch
st or sts- stitch or stitches
RS- right side
WS- wrong side
Complete Video Tutorial
Sizes are written in the following order: 0-3 months, 3-6 months, 6-12months, 1-2 years, 3-5 years
| Bonnet Body | ||||||
| Leave a long tail for sewing later. | ||||||
| Ch | 54 | 60 | 66 | 66 | 72 | |
| *Note* Due to the stitch pattern, odd numbered rows will be on the WS (the inside of the bonnet). Mark the WS with a stitch marker so you can keep track of right and wrong sides. | ||||||
| Row 1 (WS) | ||||||
| hdc in the 3rd ch from hook, hdc in each st across the row | ||||||
| Total sts | 52 | 58 | 64 | 64 | 70 | sts |
| Row 2 (RS) | ||||||
| ch2, dc in the first st, *sk the next st, dc in the next st, go back and dc in the st you skipped, repeat from * to the last st, dc in the last st, turn | ||||||
| Total sts | 52 | 58 | 64 | 64 | 70 | sts |
| Row 3 (WS) | ||||||
| ch1, hdc in each st across, turn | ||||||
| Total sts | 52 | 58 | 64 | 64 | 70 | sts |
| Repeat rows 2 & 3 until your bonnet’s width measures: | 14 | 15 | 16.5 | 18 | 19 | cm |
| 5 | 5.5 | 6 | 6.5 | 7 | in | |
| Make sure to end on a row 3, WS row. Do not break yarn. Fold the bonnet in half and sew the back using a mattress stitch. See photos below. |
| Decrease of Bonnet Neck | ||||||
| We will now be working along the bottom of the bonnet into the ends of each row. | ||||||
| Row 1 (WS) | ||||||
| ch1, hdc in the end of the first row, *hdc2tog the next two rows, hdc into the end of the next row, repeat from * across the bottom of the bonnet, hdc in any leftover sts if it does not work out evenly, turn | ||||||
| *Note* There will be 2 stitches for every 3 rows of the bonnet. By decreasing the number of stitches, the bottom of the bonnet will be shaped nicely around the neck. | ||||||
| Bottom Ribbing- worked on the RS of the bottom of the bonnet | ||||||
| Row 1 | ||||||
| ch 5, hdc in the 3rd ch from the hook, hdc in each ch, sl st in the next 2 sts, turn | ||||||
| Row 2 | ||||||
| do not ch, sk the 2 sl sts, hdc in the BLO up the ribbing, turn | ||||||
| Row 3 | ||||||
| ch1, hdc in the BLO down the ribbing, sl st in the next 2 sts, turn | ||||||
| Repeat Rows 2 & 3 until you have reach the end of the bottom of bonnet, make sure you end on a Row 2 | ||||||
| Front Ribbing | ||||||
| Rotate the bonnet so you are now working along the front. (see pic above) Make sure you stitch this ribbing very tightly, if you notice it becomes baggy, I suggest sizing down a hook size or two. | ||||||
| Row 1 | ||||||
| ch 6, sc in 2nd ch from hook and in each ch down, sl st in the next 2 sts, turn | ||||||
| Row 2 | ||||||
| do not ch, sk the 2 sl sts, sc in the BLO up the ribbing, turn | ||||||
| Row 3: | ||||||
| ch1, sc in the BLO down the ribbing, sl st to the next st, sl st into the next st, turn | ||||||
| Repeat Row 2 and 3 until you have completed the front ribbing on the bonnet, do not break yarn, continue to the straps. |
| Straps | ||||||
| ch | 45 | 50 | 55 | 60 | 65 | |
| sts for the strap, sc in the 2nd ch from hook and in each ch up the strap, break yarn | ||||||
| Total sts | 44 | 49 | 54 | 59 | 64 | sts |
| Join yarn to the other corner of the bonnet to make the other strap. | ||||||
| ch | 45 | 50 | 55 | 60 | 65 | |
| sts for the strap, sc in the 2nd ch from the hook and each ch up the strap, break yarn | ||||||
| Total sts | 44 | 49 | 54 | 59 | 64 | sts |
